Framed Staple Coils

$24.95

Framed Staple Coils provide the benefits of a fused Clapton coil with added surface area and the benefits of a staple coil. Finished off with a 40G Fuse make these coils solid flavour machines.  

Core: Two Pieces of 28g Wire Buddha Nichrome 80

Fuse: 40g Wire Buddha Nichrome 80 Sandvik Wire

Wraps: 5

Inner Diameter: 3mm

Single Coil Resistance: 0.24

Dual Coil Resistance: 0.12

 

Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomiser's. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.