FLAVLIENS
More Cores = More Flavour
10 Ply Framed Staple Aliens or Flavliens as I like to call them are here. 10 strands of .3 ribbon, two 30 gauge frames and a 36 gauge alien wrap, these bad boys will keep your taste buds happy.
Core: 10 x 0.3mm Nichrome 80 Ribbon Wire
Frame: Two Pieces of 30g Nichrome 80
Alien Fuse: 36g Nichrome 80
Wraps: 5
Inner Diameter: 3mm
Single Coil Resistance: 0.22Ω
Dual Coil Resistance: 0.11Ω
Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomiser's. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.